Sausage stuffer - 5 L - horizontal - incl. 4 filling tubes

If you want to make sausages quickly and efficiently, use a professional sausage maker. Thanks to its horizontal position, this sausage maker fits on any work surface. With a filling capacity of 5 liters, you can quickly make a large number of sausages. The casing in which the sausages are made can be easily slid onto one of the four filling tubes provided. The dimensions of the filling tubes are: 16, 22, 32 and 38 mm in diameter. As the pressure plate has an air hole, there is as little air as possible entering the sausages. In addition, it is surrounded by a seal. On the side, there is a crank handle that can be operated manually to make sausages at two speeds.

Fast and easy sausage making

To make sausages, you first need to choose the desired filling tube. The thinner the tube, the thinner the sausage. Put the ingredients in the reservoir, which you just need to tilt towards you to fill. Then slide the casing all the way onto the filling tube and hold it firmly in place. With the other hand, turn the crank and the casing will be filled with sausage meat. Make sure the sausage is well filled without letting in too much air. Your sausage will be ready in no time, and you can move on to the next one.

Entirely made of stainless steel

For good hygiene, it is important to clean the sausage stuffer properly. All parts are made of stainless steel and several of them can be removed for cleaning in the dishwasher. The pressure plate is easy to clean with a damp cloth and a disinfectant. After cleaning, you can put all the parts back in place for the next use. The sausage stuffer is also equipped with four rubber feet so that it can be placed firmly without slipping.

• A robust, commercial sausage stuffer
• Stainless steel casing and base plate
• Stainless steel cylinder, shaft, and pressure plate
• Stainless steel screw ring and filling tubes
• Stainless steel nuts, bolts, and screws
• Pressure plate with air hole
• Perfectly sealed pressure plate with gasket
• The output section can be removed in one piece
• 2 speeds for perfect dosing
• Rests on four rubber feet
• Easy to clean
• Net weight: 12 kg
• Filling capacity: 5L
• Cylinder dimensions: Ø14 x 32cm
• Device dimensions: W69 x D30 x H34cm
• Cylinder outlet diameter: Ø5cm
• Four stainless steel filling tubes of Ø16mm, Ø22mm, Ø32mm, and Ø38mm