Sausage stuffer - 12 L - vertical - incl. 4 filling tubes

Making sausages by hand is a difficult and time-consuming job. Especially when you need a large number of sausages a day, a sausage stuffer is a perfect addition to your butcher's kitchen. With a filling capacity of 12 litres, you can make enough sausages for the entire day in no time. Thanks to its vertical model, the sausage stuffer takes up little space on your countertop. The sausage stuffer comes with four filling tubes to make narrower and thicker sausages. The sizes are: 16, 22, 32 and 38 mm in diameter. The casing into which you make the sausage is easily slid onto the filling tube. The pressure plate has an air hole so that little air gets into the sausages. The pressure plate is also nicely sealed with a gasket. You can make sausages at two speeds and thanks to the manual crank, you have a lot of control over the filling process.

Nicely filled sausages

To make thinner sausages, choose the thinnest filling tube. For thicker sausages, choose one of the other sizes. To start, tilt the reservoir and insert the fresh ingredients. Then, slide the casing or artificial casing onto the filling tube and turn the crank to fill the sausages. Keep the casing tight and ensure that as little air as possible gets into the sausage. Try to fill the sausages as tight as possible, but not too tight, as you still need to be able to press and shape the sausages.

Dishwasher safe

When working with food in a kitchen, good hygiene is very important. The sausage dispenser is entirely made of stainless steel, which makes cleaning a lot easier. In addition, the reservoir and the filling tubes are removable and can be put in the dishwasher. The pressure plate is easy to clean with a damp cloth and disinfectant. After cleaning, you can reassemble the sausage stuffer for the next use. The sausage stuffer is also equipped with four rubber feet so it can be placed stably without moving.

• A solid and commercial sausage stuffer.
• Filling capacity up to 12L
• Stainless steel housing and base plate
• Stainless steel cylinder, shaft and pressure plate
• Stainless steel screw ring and filling tubes
• Stainless steel nuts, bolts and screws
• Pressure plate with hole for venting
• Pressure plate perfectly sealed with gasket
• Output section can be removed at once
• 2 speeds for perfect dosing
• Rests on four rubber feet
• Easy to clean
• Net weight: 15 kg
• Cylinder dimensions: Ø219 x 320 mm
• Output cylinder diameter: Ø50 mm
• Unit dimensions: H630 x W330 x D300 mm

Standard included:

• Stainless steel filling tube Ø16 mm
• Stainless steel filling tube Ø22 mm
• Stainless steel filling tube Ø32 mm
• Stainless steel filling tube Ø38 mm

• Net weight: 15 kg
• Filling capacity: 12 liters
• Bottle dimensions: Ø219 x 320 mm
• Machine dimensions: W330 x D300 x H630 mm
• Output cylinder diameter: Ø50 mm
• Four stainless steel filling tubes of Ø16 mm, Ø22 mm, Ø32 mm and Ø38 mm