Sausage stuffer - 10 L - vertical - incl. 4 filling tubes

To quickly make a large number of sausages, use this professional sausage stuffer with a filling capacity of 10 litres. This way, you won't have to deal with the hassle of manually making sausages. If you don't have much space on your counter, then this vertical model is an excellent solution. When you order this robust sausage stuffer, you receive four filling tubes of different sizes: 16, 22, 32 and 38 mm. Simply slide the casing or artificial casing over the filling tube. With the pressure plate, press the ingredients into the sausage casing. Thanks to the orifice in the pressure plate, very little air gets into the casing during the process. In addition, the pressure plate is well sealed by a gasket. Fast sausage making is possible at two different speeds and, thanks to the manual crank, you keep control of the entire filling process.

Custom-made sausages

Before you start making sausages, you need to choose the right filling tube. The thicker the tube, the thicker the sausages that will come out of the sausage stuffer. Tilt the reservoir and place all the ingredients inside. Slide the casing or artificial casing over the filling tube and turn the crank to fill. It is important that you hold the casing firmly and that no air gets into the sausage. It is also advisable not to fill too tightly, otherwise the sausage cannot be formed properly.

Easy to clean in the dishwasher

Regular cleaning is essential as there is always a risk of residue in the reservoir, pressure plate or filling tube. Most stainless steel parts can be removed from the sausage stuffer for cleaning in the dishwasher. For the pressure plate, use a damp cloth and a little disinfectant. After cleaning, the sausage stuffer can be reassembled for the next use. In addition, the sausage stuffer is equipped with four rubber feet so that it can be placed without slipping.

• A solid and commercial sausage stuffer
• Stainless steel casing and base plate
• Stainless steel cylinder, shaft and pressure plate
• Stainless steel screw ring and filling tubes
• Stainless steel nuts, bolts and screws
• Pressure plate with air hole
• Perfectly sealed pressure plate with gasket
• The output section can be removed in one go
• 2 speeds for perfect dosage
• Rests on four rubber feet
• Easy to clean
• Net weight: 14 kg
• Filling capacity: 10L
• Cylinder dimensions: Ø21.9 x 27cm
• Machine dimensions: W33 x D30 x H58cm
• Output cylinder diameter: Ø5cm
• Four stainless steel filling tubes of Ø16mm, Ø22mm, Ø32mm and Ø38mm